A module for measuring variables of internal combustion engines
Keywords:
Internal combustion engine, temperature measurement, oil pressure, rotation speed, calibrationAbstract
Internal combustion engines are widely used as power supply sources in locations of difficult access. These low and mid-power engines are usually not provided with proper devices that allow users to determine the proper operation of variables such as: temperature, oil pressure, and rotation speed. This paper provides a description of the design and tune-up of a module that can be used to measure the above-mentioned variables of internal combustion engines that operate on a stationary basis. A PIC 16F873-based data acquisition card was manufactured, adapting the necessary solid state sensors for measuring the variables. The module makes it possible to visualize the variables to be measured, and it can also be programmed to set operating ranges depending on the type of motor.
Downloads
References
2. BEDOYA CARO, Iván D.; ARRIETA, Andrés A.; CADAVID, Francisco J. y PAREJA, Jhon A. Efecto del grado de carga y la cantidad del combustible piloto en el comportamiento mecánico ambiental de un motor dual diesel-biogás para generación de electricidad. Rev. fac.ing.univ. Antioquia [online]. No. 42 (2007) [citado 2013-03- 19]; p. 79-93. Disponible en: <http://www.scielo.org.co/scielo. php?script=sci_arttext&pid=S012062302007000400006&lng=es &nrm=iso>. ISSN 0120-6230.
3. DALES, Davis N. y THIESSEN, Frank J, Manual de Electrónica Automotriz y Rendimiento del motor. Segunda Edición. PRENTICE HALL S.A., 2002.
4. DE ROZAS, Miriam L. Filgueiras Sainz; FERNÁNDEZ, Miguel Castro. La capacidad de absorción para la innovación: estudio de caso en la Generación Distribuida Cubana; The absorptive capacity for innovation: study case on Cuban´s distributed generation system. En: Ingeniería Energética. Vol. 33, No. 3(2012); p. 217-228.
5. LAPUERTA, Magín; ARMAS, Octavio; AGUDELO, John R y AGUDELO, Andrés F. Estudio del Efecto de la Altitud sobre el Comportamiento de Motores de Combustión Interna. Parte 2: Motores Diesel. Inf. tecnol. [online]. Vol.17, No.5 2006, [citado 2013-03-20]; p. 31-41. Disponible en: <http://www.scielo.cl/ scielo.php?script=sci_arttext&pid=S071807642006000500006& lng=es&nrm=iso>. ISSN 0718-0764. http://dx.doi.org/10.4067/ S0718-07642006000500006.
6. LÓPEZ, José D., ESPINOSA, Jairo J., AGUDELO, John. Decoupled control for internal combustion engines research test beds. En: Rev.fac.Ing.Univ. Antioquia n.59 (jun. 2011);p. 23-31.
7. MICROCHIP TECHNOLOGY. MPASM USER’S GUIDE with MPLINK and MPLIB. 1999.
8. PÉREZ, Juan F., LENIS, Yuhan, ROJAS, Sandra, LEON, Carlos. Generación distribuida mediante gasificación de biomasa: un análisis técnico - económico e implicaciones por reducción de emisiones de CO2. En: Rev. Fac. Ing. Univ. Antioquia N.° 62 (mar. 2012); p. 157-169.
9. REYES, Javier; VELLASCO, Marley and TANSCHEIT, Ricardo. Monitoramento e diagnóstico de múltiplos sensores por redes neurais auto-associativas. Sba Controle & Automação [online]. 2012, vol.23, n.2 [cited 2013-03-20]; p. 121-137. Available from: <http://www.scielo.br/scielo.php?script=sci_arttext&pid=S01031 7592012000200001&lng=en&nrm=iso>. ISSN 0103-1759. http:// dx.doi.org/10.1590/S0103-17592012000200001.
10. VÁSQUEZ, Carmen et al. 2do taller Eficiencia Energética para la Seguridad y la Sostenibilidad de Iberoamérica (EFESOS). uct [online]. Vol.15, n.58 (2011) [citado 2013-03-19]; p. 11-18. Disponible en:<http://www.scielo.org.ve/scielo.php?script=sci_ar ttext&pid=S131648212011000100003&lng=es&nrm=iso>. ISSN 1316-4821